Annular Cutters

1 3/8" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

1 1/4" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

1 1/8" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

1 1/16" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

15/16" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

13/16" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

11/16" x 2" Annular Cutter

Drill a burr-free hole by cutting around the hole and ejecting the center as a usable slug. Annular Cutters require far less horsepower than twist drills of comparable size when run at the same feed rate. As a result, cutters can be run at higher feeds...

Hougen 11075 RotaCut Fractional Cutter Kit with Case

Small diameter cutter kit Contains an 11088 arbor assembly, center punch, extra pilot and 7 cutters Kit is packaged in a sturdy case Keeps the most often used cutter sizes handy 1/4-Inch depth of cut Shank Diameter 3/8   Set Includes...

Pilot Bit for 1/2" Thru 11/16" Cutter

Pilot Bit for 5/8" Thru 2 3/8" Cutter

Pilot Bit for 3/4" Thru 2 3/8" Cutter